b'1310 Ready: READYSinterlubeFINAL20058/3/1111:16 AMPage 18Method of Use READYA Closer LookSinterLubeMethod of UseFor best results, we recommend that you apply an initial coat of lubricant Held in place by the many pores that make up the SinterLube bushingsto the inside diameter of each SinterLube bushing before starting produc- sintered surface, the oil helps ease the operating severity as the guidetion. Ideally, the lubricant should be a high viscosity oil of the type avail- pins and bushings seat themselves. Once initial wear-in is complete,able from Ready and its distributors: the anti-friction particles embedded in the bronze matrix take over, and1 quart catalog no. 6-64-52 maintain proper operating conditions.1 galloncatalog no. 6-128-52Take A Closer Look .Actual magnied views of bushing cross sections.steel substrate Note porosity: this trapsand retains oil for longerlife. steel substrateSinterLube Thickness- up to 12 times thicker fusedthan plated bronze bondsintered bronzesintered bronzeplated bronzethickness 100x magnication 1000x magnicationThis view reveals the greater bronze thick- This view reveals the fusion bonding of theness and the porosity of our SinterLubethick SinterLubelayer to the steel substrate.Bushing.Compare The Thickness .Nominal Plated READY Diameter Bronze SinterLubeLayer LayerO Thickness Thickness1 0.002 0.0211 1/40.002 0.0221 1/20.002 0.0231 3/40.002 0.0242 0.002 0.0252 1/20.002 0.0253 0.002 0.02518'